Reinforced composite rubber plate filter press (FBXY-YZG-870-2000) can effectively reduce the moisture content, improve the separation efficiency, and save energy and reduce consumption. When the feed size of the filter press is coarse and non-viscous, the filtration resistance is small, and the filtrate will not be discharged for a short time and the feed will be terminated. The discharge of the ordinary filter press is relatively easy. However, for the filtration of compressible materials with fine particles and high viscosity, ordinary filter presses are used. The water content of the filter cake is high, and the shedding rate of the filter cake is extremely low. Even if it is manually processed, part of the adhering material cannot fall off in one piece. It is very difficult to unload the cakes, and the filter cloth needs to be washed before the next cycle can be carried out, resulting in high manual labor intensity and long unloading time. After the diaphragm filter press terminates the feed, it will enter a short pressing and filtering process to make the diaphragm bulge and squeeze the filter cake for further dehydration; the diaphragm bulge and compact the filter cake, and the water content of the filter cake during the unloading process Low, can basically fall off cleanly, so as to complete the unloading process in a short time. It improves the labor efficiency of the material, especially for the filter cake that needs subsequent drying treatment, which will save a lot of energy consumption.

Reinforced composite rubber plate filter press is a more efficient and energy-saving coal slurry dehydration equipment developed on the basis of quick-opening filter press. This model overcomes the shortcomings of quick-opening filter press with many accidents and unstable operation. Realize the functions of automatic control of feeding and unloading. Moreover, the operation is stable and the maintenance is simple. It has been popularized and applied in coal slurry dehydration. Become a replacement product for coal slurry dehydration.

When Reinforced composite rubber plate filter press starts to work, the hydraulic cylinder pushes the compression plate to assemble and compress the filter plates to form a closed filter cavity, and then the slurry is pressed into each filter chamber by the feed pump During filtration, solid particles remain in the filter chamber. The filtrate passes through the filter cloth and flows through the drain groove of the filter plate to the drain port of the filter plate to be discharged outside the machine. After the filtration, the compressed gas enters the cavity between the diaphragm and the core plate to squeeze the filter cake for secondary pressing and dehydration. After pressing, there is still a certain amount of water between the particles. The moisture content of the filter cake is further reduced to complete the filtration process.

Reinforced composite rubber plate filter press divides the filter plates into several groups, and the filter plates are connected by a pull plate chain. The filter plate group is pulled several times through the pull plate mechanism to remove the filter cake, which solves the problem of sometimes operation Improper, unloading concentration causes the problem that the lower belt conveyor or scraper material is compressed and blocked.